Easy-Laser® E950 Bore
Bore alignment with the highest reliability and precision
Easy-Laser® E950 makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to simple operation. The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. You can then evaluate the results directly on-site with different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is checking for ovality, for example, to analyse the wear rate. The measurement system takes care of all these complicated calculations for you. You measure and align both full and half bearing journals with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability, and measure with a resolution of 0.001 mm [0.05 mils]. Measurement distance up to 40 m [130 feet]. Easy-Laser® E950 is suitable for use both in production and out in the field.
Easy-Laser® E950-A, Easy-Laser® E950-B and Easy-Laser® E950-C
We offer three versions of the measurement system. Easy-Laser® E950-A is primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications. Positioning work pieces in machine tools is also an appropriate application. Easy-Laser® E950-B is primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines. Easy-Laser® E950-C is primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications, where small diameters have to be measured. See system content further down the page.
Straightness of shafts and coupling alignment
With the systems, you can also measure the straightness of shafts, bases/foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train on the market. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.
- 1 Display unit E-Series E51
- 1 Laser transmitter D75
- 1 Detector E7
- 1 Detector E9 (E950-C only)
- 1 Bluetooth unit (E950 A/B only)
- 1 Cable with Push/Pull connectors (2 m)
- 1 Cable with Push/Pull connectors (5 m)
- 1 Laser Transmitter bracket with three magnetic bases (E950-B only)
- 1 Offset hub for D75
- 1 Self-centering detector bracket with two magnet bases for diameters of 250-1200 mm (E950-B only)
- 1 Set of offset hub arms for diameters of 100-500 mm [3.93] (E950-A/C only)
- 1 Set of magnets for offset hub arms (E950 A/C only)
- 1 Slide bracket, width 25 mm, min. Ø80 mm (E950-C only)
- 1 Rod Adapter with built-in target (E950-C only)
- 1 Slide bracket min. Ø120 mm (E950-A/C only)
- 1 Slide bracket min. Ø200 mm (E950-A/C only)
- 1 Slide bracket min. Ø300 mm (E950-A/C only)
- 1 Target E-Series (E950-A/B only)
- 1 Magnet base (E950 A/C only)
- 1 Set of rods
- 1 Strap for display unit
- 1 Manual
- 1 Measuring tape (5 m)
- 1 USB Memory Stick with EasyLink™ program
- 1 USB Cable
- 1 Battery Charger (100-240 V AC)
- 1 Hexagonal wrench set
- 1 Cleaning cloth for optics
- 1 CD for documentation
- 1 Carrying case
* We offer Training for all Geometric Measurement systems in our Machinery Installation & Maintenance Training program.
Easy-Laser® E950 Bore Programs
The straightness programs of E950 system are very versatile, and let you work in the way that suits every job. You can add, remove and remeasure measurement points at any time during the measurement. Up to 999 points can be handled by the program.
You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases.
Easy-Laser® E950 Bore Expandability
Easy-Laser® measurement and alignment systems are already extremely flexible in their standard form. By using clever accessories, you can adapt the systems for your own needs, now and in the future as your measurement requirements change. It is cost-effective. We have standardised measurements between the mounting holes in the different parts, and often there are mounting holes on several sides to facilitate mounting on the machine. Experience tells us that this is very much appreciated. A further advantage is that you can use one of the measuring units separately as a detector with, for example, our geometric laser D22. This expands the areas of application of the measurement system. Easy-Laser® is a system that is complete in its full meaning!
Easy-Laser® E950 Bore Accessories
Battery Powered Thermal Printer
With cable and 220V or 110V charger. For connection to all systems with display unit D279. (Printer included as standard in systems D650 and D660.)
Database and documentation software for Windows®. Included in all D-Series Shaft Alignment systems.
D283 Vibrometer Probe
Part No.: 12-0283
For measuring vibration levels (mm/s) and bearing condition (g-value). For systems with “Vibrometer” software in display unit D279.
Notes: Standard “red cable” also needed to be able to connect to display unit. For use with D-series equipment only.
Part No.: 12-0039
The spherical feet can be placed in two different for adaptation to small or large shaft diameters. Used when the shaft cannot be rotated. Mounted with standard chains.
Thin Chain Bracket
Part No.: 12-0412
Used when the space between coupling and machine is limited. Width: 12 mm [0.5"].
Notes: Includes thin chains and ti ghtening tool.
Part No.: 12-0413
For axial mounting on flanges or shafts. With M6 screws working as radial supports, and four super magnets.
Cardan Bracket Set
Part No.: 12-0615
For alignment of flange/offset mounted machines.
Notes: Delivered in plasti c case. For E-series.
Part No.: 12-0013
For direct attachment to shaft or flange. Versatile magnet base with On/Off function and many optional rod mounting possibilities. (Included in system D505/D525).
Notes: Three sides are magnetic.
Allows axial displacement between measuring units to be able to rotate past projecting machine parts. (Included in system D505/525).
Belt & Chain Alignment
Part No.: 12-0411
Used for aligning Belts & Chains (sheaves/pulleys). The Easy-Laser® D160 detector unit can be connected to our standard display unit D279*, which is included in shaft alignment systems D480, D505 and D525. The pulleys’ mutual parallelism is shown digitally with adjustment and shim values for the machine’s foot pair. This unit also allows you to save, print out and transfer the measurement results to a PC, in the same way as for normal shaft alignment.
Notes: *Does not apply to system D450 or D550, which does not have the required software for belt & chain alignment.
D22 Swivel Laser Transmitter
Part No.: 12-0022
Can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° (1) with a measurement distance of up to 40 m [130’] in radius. The laser beam can also be angled 90° to the sweep (2), within 0.01 mm/m [0.5 mils/thou].
D23 Spin Laser Transmitter
Part No.: 12-0168
With a power rotating head providing a 360° laser plane. Used together with detector D6. For quick and easy measurement of flatness and plane-parallelism. Measurement distance up to 20 metres in radius.
Notes: Tilt table included.
D75 Laser Transmitter
Part No.: 12-0075
For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 40 metres. Also available in versions with measurement distance of 60 metres (D75 Long-range).
Notes: With tilting screws for laser beam adjustment.
D75 Truebeam Laser Transmitter
For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance: 80 metres.
Notes: Not standard product.
D146 Spindle Laser Transmitter
Part No.: 12-0146
For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000rpm). The mounting pin can be fitted at either end, for example, when aligning rod cartridges. Measurement distance: 20 metres.
Notes: An extra mounting pin can be fitted at the laser aperture side, making it possible to align, for example, bar feeders.
Part No.: 12-0005
Reads off the position of the laser beam in two directions (2 axis PSD). Built-in 360° electric inclinometer. A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible)
Part No.: 12-0201
Reads off the position of the laser beam in one direction (1 axis PSD). A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible).
Notes: Only for use together with the D23 Spin Laser Transmitter.
Part No.: 12-0157
Reads off the position of the laser beam in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible.
Notes: Two alternative connectors for connection to display unit and other detectors (serial connection possible). Diameter 40 mm, length 60 mm.
D116 Measuring Unit (M)
Laser LED and detector in one housing. Reads off the position of the laser beam from another transmitter unit in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible.
Notes: Two alternative connectors for connection to display unit and other detectors (serial connection possible).
D46 Angular Prism
Part No.: 12-0046
Used when measuring squareness and parallelism. A penta-prism that deflects the beam 90° is integrated in an adjustable housing.
Notes: A. With the rotatable angular prism you can reach the detector at any height on a flange, or on a roll at any height. B. The beam is aligned with the detector using the sled.
Bracket for D75
Part No.: 12-0187
Used for mounting against shaft ends, flywheels etc. Laser beam can point from the bracket or through the bracket.
Notes: With three super magnets.
Magnet Base with Turnable Head
Part No.: 12-0045
Used together with detectors, measurement units and laser transmitters where the unit needs to be rotated on a fixed magnetic foot.
Notes: On/Off button, 360° turnable head with two rod mounting possibilities.
Sliding Bracket with Rotatable Head
Part No.: 12-0137
Available in different designs, with or without magnets, measurement probe and turnable head, depending on measurement application.
Part No.: 12-0269
Used for D22 Swivel Laser Transmitter and D46 Angular Prism. Height 500-2730 mm.
Part No.: 12-0203
For parallelism measurement of rolls. Used with the D22, D46 and 2 tripods.
Notes: Detector E5 also needed.
Easy-Laser® E950 Bore
Request a Quote