Easy Laser Documentation

Battery Powered Thermal Printer

Part No.:

With cable and 220V or 110V charger. For connection to all systems with display unit D279. (Printer included as standard in systems D650 and D660.)

Notes:

EasyLink™ Software

Part No.: 

Database and documentation software for Windows®. Included in all D-Series Shaft Alignment systems. 

Notes:

Barcode Reader

Part No.: 12-0619

The barcode reader is used to enter the machine data before measurement. At the first measurement of the machine apply the adhesive bar code label. Next time the machine is checked the dimensions are read in directly. Connected in the USB port.

Notes: Includes 25 bar code stickers

Easy Laser Vibration Measurement

D283 Vibrometer Probe

Part No.: 12-0283

For measuring vibration levels (mm/s) and bearing condition (g-value). For systems with “Vibrometer” software in display unit D279. 

Notes: Standard “red cable” also needed to be able to connect to display unit. For use with D-series equipment only.

E285 Vibrometer Probe

Part No.: 12-0656

Used for measuring vibration (mm/s, inch/s) and bearing condition (g-value). For systems with program "Vibrometer" in Display unit E418. 

Notes: Can only be used in the E-series.

Easy Laser Shaft Alignment

Sliding Bracket

Part No.: 12-0039

The spherical feet can be placed in two different for adaptation to small or large shaft diameters. Used when the shaft cannot be rotated. Mounted with standard chains.

Notes:

Thin Chain Bracket

Part No.: 12-0412

Used when the space between coupling and machine is limited. Width: 12 mm [0.5"].

Notes: Includes thin chains and ti ghtening tool.

Magnetic Bracket

Part No.: 12-0413

For axial mounting on flanges or shafts. With M6 screws working as radial supports, and four super magnets.

Notes:

Cardan Bracket Set

Part No.: 12-0615

For alignment of flange/offset mounted machines.

Notes: Delivered in plasti c case. For E-series.

Magnet Base

Part No.: 12-0013

For direct attachment to shaft or flange. Versatile magnet base with On/Off function and many optional rod mounting possibilities. (Included in system D505/D525).

Notes: Three sides are magnetic.

Offset Bracket

Part No.: 

Allows axial displacement between measuring units to be able to rotate past projecting machine parts. (Included in system D505/525).

Notes:

Easy Laser Belt & Chain Alignment

D160 BTA

Part No.: 12-0411

Used for aligning Belts & Chains (sheaves/pulleys). The Easy-Laser® D160 detector unit can be connected to our standard display unit D279*, which is included in shaft alignment systems D480, D505 and D525. The pulleys’ mutual parallelism is shown digitally with adjustment and shim values for the machine’s foot pair. This unit also allows you to save, print out and transfer the measurement results to a PC, in the same way as for normal shaft alignment. 

Notes: *Does not apply to system D450 or D550, which does not have the required software for belt & chain alignment.

E170 BTA

Part No.: 12-0659

With the Easy-Laser® E170 you can read and follow the alignment from where you are standing and make adjustments, instead of only where the detector is mounted. The detector reads off the position in relation to the laser plane and digitally displays the parallel and angular misalignment “live”. This makes alignment of the adjustable machine very easy. The accuracy of the reading means that you can be within the prescribed alignment tolerances and rely upon the result. Suitable for most types of belt drives, such as V-belt, timing belt, flat belt and chain drives.

Notes: There is no separate display unit included or available. The detector connects to the E418 display unit with BTA program, which for example is included in system E710. For connection the red cable of the main system is used. Wireless connection is not available. The E170 detector unit cannot be connected to the D-series display units or other equipment.

Easy Laser Geometric Measurement

D22 Swivel Laser Transmitter

Part No.: 12-0022

Can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° (1) with a measurement distance of up to 40 m [130’] in radius. The laser beam can also be angled 90° to the sweep (2), within 0.01 mm/m [0.5 mils/thou].

Notes:

D23 Spin Laser Transmitter

Part No.: 12-0168

With a power rotating head providing a 360° laser plane. Used together with detector D6. For quick and easy measurement of flatness and plane-parallelism. Measurement distance up to 20 metres in radius.

Notes: Tilt table included.

D75 Laser Transmitter

Part No.: 12-0075

For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 40 metres. Also available in versions with measurement distance of 60 metres (D75 Long-range).

Notes: With tilting screws for laser beam adjustment.

D75 Truebeam Laser Transmitter

Part No.: 

For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance: 80 metres.

Notes: Not standard product.

D146 Spindle Laser Transmitter

Part No.: 12-0146

For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000rpm). The mounting pin can be fitted at either end, for  example, when aligning rod cartridges. Measurement distance: 20 metres.

Notes: An extra mounting pin can be fitted at the laser aperture side, making it possible to align, for example, bar feeders.

D5 Detector

Part No.: 12-0005

Reads off the position of the laser beam in two directions (2 axis PSD). Built-in 360° electric inclinometer. A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible)

Notes: 

D6 Detector

Part No.: 12-0201

Reads off the position of the laser beam in one direction (1 axis PSD). A number of mounting holes and threads make alternative attachment possible. Two alternative connectors for connection to display unit and other detectors (serial connection possible). 

Notes: Only for use together with the D23 Spin Laser Transmitter.

D157 Detector

Part No.: 12-0157

Reads off the position of the laser beam in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible.

Notes: Two alternative connectors for connection to display unit and other detectors (serial connection possible). Diameter 40 mm, length 60 mm.

D116 Measuring Unit (M)

Part No.: 

Laser LED and detector in one housing. Reads off the position of the laser beam from another transmitter unit in two directions (2 axis PSD). With 360° incliniometers. A number of mounting holes and threads make alternative attachment possible.

Notes: Two alternative connectors for connection to display unit and other detectors (serial connection possible).

D46 Angular Prism

Part No.: 12-0046

Used when measuring squareness and parallelism. A penta-prism that deflects the beam 90° is integrated in an adjustable housing.

Notes: A. With the rotatable angular prism you can reach the detector at any height on a flange, or on a roll at any height. B. The beam is aligned with the detector using the sled.

Bracket for D75

Part No.: 12-0187

Used for mounting against shaft ends, flywheels etc. Laser beam can point from the bracket or through the bracket.

Notes: With three super magnets.

Magnet Base with Turnable Head

Part No.: 12-0045

Used together with detectors, measurement units and laser transmitters where the unit needs to be rotated on a fixed magnetic foot.

Notes: On/Off button, 360° turnable head with two rod mounting possibilities.

Sliding Bracket with Rotatable Head

Part No.: 12-0137

Available in different designs, with or without magnets, measurement probe and turnable head, depending on measurement application.

Notes:

Tripod

Part No.: 12-0269

Used for D22 Swivel Laser Transmitter and D46 Angular Prism. Height 500-2730 mm.

Notes:

Parallelism Kit

Part No.: 12-0203

For parallelism measurement of rolls. Used with the D22, D46 and 2 tripods.

Notes: Detector E5 also needed.

Easy Laser Miscellaneous

Additional Power Supply with built-in Bluetooth® unit.

Part No.: 12-0618

Chargeable battery pack which gives extra operating time. With battery status indicator and On/Off butt on. Built-in Bluetooth ® unit for wireless measurement data transfer to the display unit.

Notes: Only for the E-series. Includes “red cable” 0.16 m [6.3”].

Additional Power Supply

Part No.: 12-0617

Chargeable battery pack which gives extra operating time. Charging status shown with LED.

Notes: Only for the E-series. Includes “red cable” 0.16 m [6.3”].

Charger 12-36 V

Part No.: 12-0585

To charge the display unit via 12–36 V socket.

Notes: The red adapter can be detached for use with newer (smaller) types of connectors.

Target

Part No.:

Simplifies the rough alignment at very long distance and large alignment fault. Target is mounted on measuring unit or detector.

Sun Protection for PSD

Part No.: 12-0587

To screen against extremely strong ambient light or to use in very sunny conditions when light causes unstable values. With magnetic attachment.

Notes: 

VGA Kit

Part No.: 12-0573

Makes it possible to show display unit screen image on a projector, for example, in a training context. 

Notes: The VGA kit (the circuit board) must be ordered at system purchase for factory installati on, it cannot be mounted aft erwards.